Skip to main content

golang and fossil

Here I am tethered to my phone because my ISP has failed. The challenge I face is that all of my development hardware is in the same office with me. And while a MiFi type device (with RJ45 connectors exist and would be useful there are practical limits to bandwidth, data, cost and then there is whatever services I'm providing.

In my DEV environment I have 4x 32GB Intel NUCs. Two are running VMware, one is a DEV machine where I edit and run the DEV code. I have gitlab, mattermost, and QA running on another host. And a few other tools here and there including haproxy and traefik. I'd say it's a mess but it's feature packed.

Each of the NUCs cost about $700 and are only partially utilized and the cost of power and any interruption of service. 32GB of ram at DigitalOcean costs $160.  Cloud services are not perfect but I have had services running for many years without an outage. Proper cloud hardware will survive a host hardware crash where a host crash on a NUC will take many hours to repair assuming some amount of luck or planning but mostly luck. I'm not exactly certain how the cloud providers allocate their public IP pool, however, they usually have diverse and redundant routing providing many levels of reliable communication that would come at a great expense for a SOHO.

Today is yet another day when I lost service. I'm writing this post while tethered to my phone. The challenge is that my DEV and QA environments are off the air because I do not have a way for my NUCs (connected to the wired LAN) to get to the internet with the same IP my ISP provides.

Comments

Popular posts from this blog

Entry level cost for CoreOS+Tectonic

CoreOS and Tectonic start their pricing at 10 servers. Managed CoreOS starts at $1000 per month for those first 10 servers and Tectonic is $5000 for the same 10 servers. Annualized that is $85K or at least one employee depending on your market. As a single employee company I'd rather hire the employee. Specially since I only have 3 servers.

The pricing is biased toward the largest servers with the largest capacities; my dual core 32GB i5 IntelNuc can never be mistaken for a 96-CPU dual or quad core DELL

If CoreOS does not figure out a different barrier of entry they are going to follow the Borland path to obscurity.

UPDATE 2017-10-30: With gratitude the CoreOS team has provided updated information on their pricing, however, I stand by my conclusion that the effective cost is lower when you deploy monster machines. The cost per node of my 1 CPU Intel NUC is the same as a 96 CPU server when you get beyond 10 nodes. I'll also reiterate that while my pricing notes are not currently…

Agile is still dead and has been since 1991

[updated 2011.09.30] yet another response to Agile is good.
When you have so much of you career invested in something like Agile, XP etc... it can be hard to see the forest for the trees. I had a consulting job in The Haag many years ago. IBM was the incumbent contractor at the customer site (a bank) but after 5 years on the job they had not written a single line of functioning code. In the office there were two teams of software people... both behind closed doors. The first team was the Data team and the second team was Functional. They rarely spoke and they never shared information. I was there for a week, introduced the client to OO and we had a functioning prototype. Smart people do smart things, You cannot make an underachiever exceptional by using Agile. Either they get "it" or they don't.
I just commented on a blog. I'm sure there is some validity to his post beyond observing that Agile Scrum is broken. It certainly is not what it was originally intended but for…

eGalax touch on default Ubuntu 14.04.2 LTS

I have not had success with the touch drivers as yet.  The touch works and evtest also seems to report events, however, I have noticed that the button click is not working and no matter what I do xinput refuses to configure the buttons correctly.  When I downgraded to ubuntu 10.04 LTS everything sort of worked... there must have been something in the kermel as 10.04 was in the 2.6 kernel and 4.04 is in the 3.x branch.

One thing ... all of the documentation pointed to the wrong website or one in Taiwanese. I was finally able to locate the drivers again: http://www.eeti.com.tw/drivers_Linux.html (it would have been nice if they provided the install instructions in text rather than PDF)
Please open the document "EETI_eGTouch_Programming_Guide" under the Guide directory, and follow the Guidline to install driver.
download the appropriate versionunzip the fileread the programming manual And from that I'm distilling to the following: execute the setup.sh answer all of the questio…