Skip to main content

big 3 under 5 pounds

While I like my bivy when my tarp is in leanto mode the fabric offers protection from bugs and rain. But in reality unless you're in sleeping bag weather any precipitation is going to disrupt your sleep as the bivy is thin. Also, it's impossible to regulate your temperature and not expose yourself. Jupiterhikes makes the recommendation that an umbrella and budnet sock would do the trick. And it does. The umbrella is a nice addition to the tarp. Lastly there is a nice combination of hammock and ground shelter. Without spending too much my pack, shelter, and sleep systems weigh less than 5 pounds.

The bugnet is from outdoor vitals. It's wide at one end and small at the other. It comes with a shockcord ridgeline which is not necessary in ground mode. It weights about 5oz and costs $34. In hammock vocabulary a sock is actually a cone shaped fabric with a cinch on each end. Crawl into your hammock and pull the sock up as if you were the foot only bigger. The OV model uses two different noseeum mesh. The Dutchware version is half noseeum and half 10D. Costs $57+ and weighs 8oz. The difference seems to be the weight of the mesh. So now the decision seems to be whether or not to go with the dual mesh or half mesh half coated 10D. I like the DW sock because it offers additional rain protection when under a tarp.

Watching Jupiter's video

He makes some great points and then there is the same mistake I make every time... [1] keep your item count down [2] buy what you need or want the first time it's much cheaper than owning duplicates. [3] make your selection based on the type of hike you want to have.


Popular posts from this blog

Entry level cost for CoreOS+Tectonic

CoreOS and Tectonic start their pricing at 10 servers. Managed CoreOS starts at $1000 per month for those first 10 servers and Tectonic is $5000 for the same 10 servers. Annualized that is $85K or at least one employee depending on your market. As a single employee company I'd rather hire the employee. Specially since I only have 3 servers.

The pricing is biased toward the largest servers with the largest capacities; my dual core 32GB i5 IntelNuc can never be mistaken for a 96-CPU dual or quad core DELL

If CoreOS does not figure out a different barrier of entry they are going to follow the Borland path to obscurity.

UPDATE 2017-10-30: With gratitude the CoreOS team has provided updated information on their pricing, however, I stand by my conclusion that the effective cost is lower when you deploy monster machines. The cost per node of my 1 CPU Intel NUC is the same as a 96 CPU server when you get beyond 10 nodes. I'll also reiterate that while my pricing notes are not currently…

Agile is still dead and has been since 1991

[updated 2011.09.30] yet another response to Agile is good.
When you have so much of you career invested in something like Agile, XP etc... it can be hard to see the forest for the trees. I had a consulting job in The Haag many years ago. IBM was the incumbent contractor at the customer site (a bank) but after 5 years on the job they had not written a single line of functioning code. In the office there were two teams of software people... both behind closed doors. The first team was the Data team and the second team was Functional. They rarely spoke and they never shared information. I was there for a week, introduced the client to OO and we had a functioning prototype. Smart people do smart things, You cannot make an underachiever exceptional by using Agile. Either they get "it" or they don't.
I just commented on a blog. I'm sure there is some validity to his post beyond observing that Agile Scrum is broken. It certainly is not what it was originally intended but for…

eGalax touch on default Ubuntu 14.04.2 LTS

I have not had success with the touch drivers as yet.  The touch works and evtest also seems to report events, however, I have noticed that the button click is not working and no matter what I do xinput refuses to configure the buttons correctly.  When I downgraded to ubuntu 10.04 LTS everything sort of worked... there must have been something in the kermel as 10.04 was in the 2.6 kernel and 4.04 is in the 3.x branch.

One thing ... all of the documentation pointed to the wrong website or one in Taiwanese. I was finally able to locate the drivers again: (it would have been nice if they provided the install instructions in text rather than PDF)
Please open the document "EETI_eGTouch_Programming_Guide" under the Guide directory, and follow the Guidline to install driver.
download the appropriate versionunzip the fileread the programming manual And from that I'm distilling to the following: execute the answer all of the questio…