Skip to main content

5x9 Black Tarp

With a little rain today I noticed that my brown (stasha) permitted some rain to wet my bugnet. It was a quick shower and everything dried quick enough. So I replaced the 8' stasha with a 9' bearpaw.


I placed the black on top of the brown and exchanged the guy lines until the brown would slip out and the black was taught. The black tarp might cast a slightly better shadow, however, my hope is that it dries faster.

The guy out points were different on the stasha than this one.


I have a pole on the corner with no grommet so I used the compression knot of the corner lineloc to hold the extra pole.


The ridgeline has a Yama grommet. This configuration meant that the ridgeline was going to be closer to the ground by 1 to 2 inches. It's a neat little grommet but I'm not sure how strong/durable it is. The yellow line includes a prusik to add tension to the pole. There are a few more options here which I have yet to explore.

Not pictured here is the bivy. The black tarp has a couple of inside loops which prevent the net tent cordage from drawing water into the bivy. It's like preventing a drip-line. Also there is no shockcord here so the stakes need to be secure. Lastly I have to keep reminding myself that I only need 1 tree with reasonably close branches. The tree becomes essentially the 4th wall.

Comments

Popular posts from this blog

Entry level cost for CoreOS+Tectonic

CoreOS and Tectonic start their pricing at 10 servers. Managed CoreOS starts at $1000 per month for those first 10 servers and Tectonic is $5000 for the same 10 servers. Annualized that is $85K or at least one employee depending on your market. As a single employee company I'd rather hire the employee. Specially since I only have 3 servers.

The pricing is biased toward the largest servers with the largest capacities; my dual core 32GB i5 IntelNuc can never be mistaken for a 96-CPU dual or quad core DELL

If CoreOS does not figure out a different barrier of entry they are going to follow the Borland path to obscurity.

UPDATE 2017-10-30: With gratitude the CoreOS team has provided updated information on their pricing, however, I stand by my conclusion that the effective cost is lower when you deploy monster machines. The cost per node of my 1 CPU Intel NUC is the same as a 96 CPU server when you get beyond 10 nodes. I'll also reiterate that while my pricing notes are not currently…

eGalax touch on default Ubuntu 14.04.2 LTS

I have not had success with the touch drivers as yet.  The touch works and evtest also seems to report events, however, I have noticed that the button click is not working and no matter what I do xinput refuses to configure the buttons correctly.  When I downgraded to ubuntu 10.04 LTS everything sort of worked... there must have been something in the kermel as 10.04 was in the 2.6 kernel and 4.04 is in the 3.x branch.

One thing ... all of the documentation pointed to the wrong website or one in Taiwanese. I was finally able to locate the drivers again: http://www.eeti.com.tw/drivers_Linux.html (it would have been nice if they provided the install instructions in text rather than PDF)
Please open the document "EETI_eGTouch_Programming_Guide" under the Guide directory, and follow the Guidline to install driver.
download the appropriate versionunzip the fileread the programming manual And from that I'm distilling to the following: execute the setup.sh answer all of the questio…

Prometheus vs Bosun

In conclusion... while Bosun(B) is still not the ideal monitoring system neither is Prometheus(P).

TL;DR;

I am running Bosun in a Docker container hosted on CoreOS. Fleet service/unit files keep it running. However in once case I have experienced at least one severe crash as a result of a disk full condition. That it is implemented as part golang, java and python is an annoyance. The MIT license is about the only good thing.

I am trying to integrate Prometheus into my pipeline but losing steam fast. The Prometheus design seems to desire that you integrate your own cache inside your application and then allow the server to scrape the data, however, if the interval between scrapes is shorter than the longest transient session of your application then you need a gateway. A place to shuttle your data that will be a little more persistent.

(1) storing the data in my application might get me started more quickly
(2) getting the server to pull the data might be more secure
(3) using a push g…